**************************************************************************************
  Data file text conversion utility for SB-C2AN
                                                   << letcvt_c2an >>
**************************************************************************************
Thank you for purchasing the LINEEYE portable communication analyzer and its options.
This instruction shows the followings;
- How to convert the monitored data into text (csv) format.
To use it correctly, please read this instruction thoroughly.

======================================================================================
1. Appropriate model

  - The CAN/High-speed Analog expansion board "SB-C2AN" for LE-8500X/LE-8600X series

======================================================================================
2. Copyright and Exemption Clause

   LINEEYE holds the copyright on this program.
   LINEEYE shall not be liable for any damages arising from the program.
   The user of the product has all responsibility of this program.
   It is prohibited to reprint of this instruction without prior permission from LINEEYE.
   The content of this instruction is subject to change without any notice.

======================================================================================
3. Notice

   It supports data only measured by SB-C2AN.
   This program does not include the installer. To remove the program, remove the file
   itself.

======================================================================================
4. Preparation

     (1) Make a directly in the PC, and copy "lecandt2value.exe" there.

     (2) Copy the DT files to any directly in the PC.

======================================================================================
5. Convert Data

     (1) Double-click on "letcvt_c2an.exe".

     (2) Click on "..." at "Folder" and select the directly.
         (Measured data files (.DT) were copied in that directly.)

     (3) Measured data files are listed at "File list:".
         (Press "Refresh" to update the file information.)

     (4) Click the file for conversion data. It is able to select more than one files at 
         once. Press "Select all" to select the all files. Press "No select" to cancel the
         selection.

     (5) Select output options.

     (6) Press "Start convert" to start converting the data.

     (7) After the conversion, the ".txt", ".csv" or ".kml"  format file with same name
         will be made in the same directly.

======================================================================================
6. Output Options

  * : Not shown if not available for current target/format selection.

  [Target data]
    Select the data to be output.
     - CAN/CAN FD   : CAN frames and CAN FD frames
     - Analog       : analog measurement data
     - GNSS(GPS)    : GNSS(GPS) position data
     - Analog wave  : analog ware monitor data

  [Output format]
    Select output file format.
     - ".txt"   : plane text *
     - ".csv"   : CSV format
     - ".pcap"  : Pcap format
     - ".kml"   : KML format *

  [Target data line] *
    CAN measurement channel (CH1/CH2) to be converted.

  [Timestamp] *
    Select timestamp format (minimum unit).
    - Micro sec
    - Millisec
    - Second
    - Delta time *

    - Elapsed time *
        When checked, elapsed time since the measurement start is output
        instead of date/time.
  
  [Print option] *
    Following items are output if checked.
     - Elapsed time    : elapsed time since the measurement start
     - Delta time      : time difference from the previous frame
     - Analog          : analog measurement data **
     - GNSS(GPS)       : GNSS(GPS) position data **

  ** : The most current data at that time is used.
       (CAN/Analog/GNSS measurements are not synchronized)

        CAN frame #1   -> output without analog data
        Analog data #1
        CAN frame #2   -> output with Analog data #1
        Analog data #2
        Analog data #3
        Analog data #4
        CAN frame #3   -> output with Analog data #4

  [Additional opt.]
    If you want to change the line feed code or output code,
    check here and click on "..." to show the additional setting dialog.

======================================================================================

  LINEEYE Co, LTD.

    URL         :https://www.lineeye.com
    E-mail      :info@lineeye.com

**************************************************************************************